|
Walking trails Trail use has become very popular for a wide variety of users. Some trails are designated as nature trails, and are used by people learning about the natural world. Many trails are designated day trails, meaning that they are generally used by people out for a short hike, less than a day. Some trails are designated backpacking trails, or long-distance trails, and are used by both day hikers and by backpackers. Some of the trails are over a thousand miles (1,500 km) long and may be hiked in sections by backpackers, or completed in one trip by dedicated hikers. Some trails are specifically used by other outdoor enthusiasts to gain access to another feature, such as good climbing sites. Many runners also favor running on trails rather than pavement, as giving a more vigorous work-out and better developing agility skills, as well as providing a more pleasant exercise environment. See trail running. Bicycle trails Recent decades have seen an explosion of interest in cycling, both street-type and off-road type. Many graded, surfaced bike paths have been built, but especially popular is the off-road, or ''mountain'' biking. A common term for these facilities is simply "bike trail". These trails may be built to a different set of standards than foot trails, requiring more stable, harder surfaces, less strenuous grades, longer sight visibility, and less sharp changes in direction. On the other hand, the cross-slope of a bike trail may be significantly greater than a foot trail, and the actual treadway may be narrower in some cases. A particular offshoot of trail biking is downhilling, which can be environmentally destructive if not well-managed. Downhilling is particularly popular at ski resorts such as Mammoth Mountain in California or Whistler in British Columbia, where ski lifts are used to get bikes and riders to the top of the mountain. Because of the greater need for more gradual grades, changing elevations may involve sidehill trails with multiple switchbacks, while these may not be necessary for hikers. In cases where hikers use these bike trails, attention must be paid to the potential of cutting across switchbacks. Where bike trails intersect with pedestrian or equestrian trails, signage at the intersections is important, and high visibility onto the intersecting trails must be a priority in order to prevent collisions between fast-moving cyclists and slower moving hikers and horses. Bicycles and horses should be allowed on the same trails where the trail is wide enough with good visibility. A well designed bike trail will have an average grade of less than 10%, and will generally follow a countour line, rather than straight downhill. The trail should slope out or accross the trail 3-5% downhill to encourage water to run off the side, rather than down the trail bed. In addition, frequesnt grade reversals also prevent water from running down the trail, make the trail more fun and interesting to ride, and generally help keep bike speeds down, providing a more safe trail experience for all users. The International Mountain Biking Association (imba.com) is an excellent resource on trail system design, trail building and maintenance. Equestrian trails Horseback riding has continued to be a popular activity for many trail users. Again, horse trails must be built to different standards than other trails. Sight distance is an important issue with horse trails, as is overhead and side clearance. While trail surface types are a relatively insignificant issue with hikers, they may be an important issue with horses. Horses can negotiate much steeper terrain on a dirt trail, for instance, than on a gravel trail. Horses can usually negotiate much the same grades as hikers, but not always, although they can more easily clear obstacles in the path such as logs. A hard trail surface and drainage is a critically important issue on horse trails because of the relatively greater bearing impact of the horse's hoof on the trail than a hiker's foot. Cross-country skiing In cross-country skiing, a trail (also called a 'track' or 'piste') refers to the parallel grooves cut into the snow, one for each ski. Motorized trails
Urban and suburban trails Though the term trail conjures up images of a well-beaten path in a woodland setting, more and more frequently, the term is coming to refer to any sort transportation route designed for non-automobile traffic. For example, a trend sweeping Northern America, especially in the rural Northeast is the conversion of abandoned railways into rail trails. Examples include the Ashuwillticook Rail Trail in Berkshire County and the Northern RailTrail of New Hampshire. Though these wide, often paved pathways could have easily been used as roads, their focus on recreational use for pedestrians and cyclists is what sets them apart as trails. In Northern America, where urban sprawl has begun to strike even the most rural communities, developers and local leaders are currently striving to make their communities more conducive to non-motorized transportation through the use of less traditional "trails." The Robert Wood Johnson Foundation has established the Active Living by Design program to improve the livability of communities in part through the trails, both in a more traditional sense, as is being done by the Upper Valley Trails Alliance or in the broader, as is being done by Groundwork Somerville. Another type of trail that was quite popular in the 1970s and 1980s but is less popular today is the exercise trail (also known as trim trail), which combines running with exercise stations. The term trail has also been used by developers and urban planners for a variety of modern paved roads, highways, and boulevards. A particularly unusual use of the term is in the province of Alberta, Canada, which has multi-lane freeways called "trails." Trail administration In 1968, the United States created its National Trails System, which includes National Scenic Trails, National Historic Trails and National Recreation Trails. In the British Isles many trails and footpaths are of ancient origin and are protected under law as rights of way. Trail construction While many trails have arisen through common usage, quality trail design and construction is a complex process requiring certain sets of skills. When a trail passes across a flat area that is not wet, often all that is required is to clear brush, tree limbs and undergrowth to produce a clear, walkable trail. When crossing streams, bridges may or may not be desirable, depending on the size of the stream and the depth of its banks. In wet areas, it may be necessary to create an elevated trailway with fill or by building a boardwalk. One problem with boardwalks is that they require frequent maintenance and replacement - boards in poor condition are often slippery and hazardous. Trails on slopes A common mistake in establishing trails is to make them on slopes that are too steep for comfort and the environment. Such steep trails generally result in serious erosion, a wide swath of impacted area as walkers go to the sides to find better footing, and the inability of many hikers to walk the trail. An absolute limit for trail grades is a grade of one in six, and a more practical limit is a slope of one in eight. Trails that ascend steep slopes may use switchbacks (also called hairpins), but switchback design and construction is a specialized topic that takes great care. The best trail designs eliminate switchbacks. If a trail is being made to be accessible to off-road wheelchairs, the grade should be no more than one in ten. If a paved trail has to be accessible to all wheelchairs, the grade must be no more than one in twelve, with periodic level pull-offs. The off-slope, or side-slope, of the trail also must be considered. This is the slope of the trail from side to side, and should never be more than one in twelve. Side-sloped trails are prone to gullying. Ideally, the treadway of the trail should be almost, but not quite, level in cross-section. Achieving the proper slope in hilly terrain usually requires the excavation of sidehill trail. This is trailway that is constructed by establishing a line of suitable slope across a hillside, then digging out by means of a mattock or similar tool to create the trail. This may be a full-bench trail, where the treadway is only on the firm ground surface after the overlying soil is removed and thrown to the side as waste, or a half-bench trail, where soil is removed and packed to the side so that the treadway is half on firm old ground and half on new packed fill. In problem areas, it may be necessary to establish the trail entirely on fill. In cases where filling is used, it's necessary to pack it firmly and to revisit the site periodically to add to the fill and repack it until fully stable. Drainage
Multi-use trails Trails intended for use by bicycles, wheelchairs and pedestrians will often be surfaced, especially in heavily-used or urban areas. This can be asphalt paving, or compressed stone dust. Such trails will also have well-built bridges with a supported deck and side rails. There has been a major effort to convert abandoned railroad grades to bike paths or multi-use paths. This has been termed "rails-to-trails". Signage
Maintenance Natural surface, single track trails will require some ongoing maintenance. However, if the trail is properly designed and constructed, maintenance should be limited to clearing downed trees and trimming back brush. If the trail is properly designed, there should be no need for major rework such as grading or erosion control efforts. See also | |||||||||||||||
|
--> | ||||||||||||||||
 |
|
| |