Navigation
  • Home
  • Recent
  • Most Active
  • Popular
  • Blog
  • Credits
  • RSS
  •   Interaction
  • Register
  • Statistics
  •   Help
  • Suggestions
  • Contact Us
  • How to Edit
  • Help



  • [Edit]


    Spirometry (meaning the measuring of breath) is the most common of the Pulmonary Function Tests (PFTs), measuring lung function, specifically the measurement of the amount (volume) and/or speed (flow) of air that can be inhaled and exhaled. Spirometry is an important tool used for assessing conditions such as asthma, cystic fibrosis, and COPD.
    Spirometric maneuvers include slow vital capacity (SVC), forced vital capacity (FVC), tidal volume (TV) and maximum voluntary ventilation (MVV). The measurement of forced vital capacity is the most commonly performed maneuver, sometimes in conjunction with slow vital capacity and/or tidal volume. A plethysmograph can be used to measure functional residual capacity (FRC).

    Results are usually given in both raw data (liters, liters per second) and percent predicted - the test result as a percent of the "predicted values" for the patients of similar characteristics (height, age, sex, and sometimes race and weight). The interpretation of the results can vary depending on the physician and the source of the predicted values. Generally speaking, results nearest to 100% predicted are the most normal, and results over 80% are often considered normal. However, review by a doctor is necessary for accurate diagnosis of any individual situation.

    The spirometry test is performed using a device called a spirometer, which comes in several different varieties. Most spirometers display a volume-time curve, showing volume (liters) along the Y-axis and time (seconds) along the X-axis. Some spirometers also produce a graph called a flow-volume loop, which graphically depicts the flow of air compared to the total volume inspired or expired. Flow is listed along the Y-axis and volume along the X-axis.



    The basic FVC test varies slightly depending on the equipment used. Generally, the patient is asked to take the deepest breath they can, and then exhale into the sensor as hard as possible, for as long as possible. It is sometimes directly followed by a rapid inhalation (inspiration), in particular when assessing possible inspiratory obstruction or restriction. Sometimes, the test will be preceded by a period of quiet breathing in and out from the sensor (tidal volume), or the rapid breath in (forced inspiratory part) will come before the forced exhalation. During the test, soft nose clips may be used to prevent air escaping through the nose. Filter mouthpieces may be used to prevent the spread of germs, particularly for inspiratory maneuvers.

    The maneuver is highly dependent on patient cooperation and effort, and is normally repeated at least three times to ensure reproducibility. Since results are dependent on patient cooperation, FEV1 and FVC can only be underestimated, never overestimated.

    Sometimes, to assess the reversibility of a particular condition, a bronchodilator is administered before performing another round of tests for comparison. This is commonly referred to as a reversibility test, or a post bronchodilation test (Post BD), and is an important part in diagnosing asthma versus COPD.

    The most commonly used guidelines for spirometric testing and interpretation are set by the American Thoracic Society (ATS) and the European Respiratory Society (ERS).

    Spirometry can also be part of a bronchial challenge test, used to determine bronchial hyperresponsiveness to either rigorous exercise, inhalation of cold/dry air, or with a pharmaceutical agent such as metacholine or histamine.

    Due to the patient cooperation required, spirometry can only be used on children old enough to comprehend and follow the instructions given (typically about 4-5 years old), and only on patients who are able to understand and follow instructions - thus, this test is not suitable for patients who are unconscious, heavily sedated, or have limitations that would interfere with vigorous respiratory efforts. Other types of lung function tests are available for infants and unconscious persons.

    example of a modern spirometer printout, http://www.iqteq.com



        Spirometry
            Explanation of Common Test Values in FVC Tests
            Technologies Used in Spirometers Over the Years
            See also

    top

    Explanation of Common Test Values in FVC Tests
      FVC: Forced Vital Capacity - This is the total amount of air that you can forcibly blow out after full inspiration, measured in liters.
      FEV1: Forced Expiratory Volume in 1 Second - This is the amount of air that you can forcibly blow out in one second, measured in liters. Along with FVC it is considered one of the primary indicators of lung function.
      FEV1 / FVC - This is the ratio of FEV 1 to FVC. In healthy adults this should be approximately 75 - 80%.
      PEF: Peak Expiratory Flow - This is the speed of the air moving out of your lungs at the beginning of the expiration, measured in liters per second.
      FEF 25-75% or 25-50%: Forced Expiratory Flow 25-75% or 25-50% - This is the average flow (or speed) of air coming out of the lung during the middle portion of the expiration (also sometimes referred to as the MMEF, for maximal mid-expiratory flow).
      FIF 25-75% or 25-50%: Forced Inspiratory Flow 25%-75% or 25%-50% - This is similar to FEF 25%-75% or 25%-50% except the measurement is taken during inspiration.
      FET: Forced Expiratory Time - This measures the length of the expiration in seconds.

    top

    Technologies Used in Spirometers Over the Years
      Volumetric Spirometers
      Water bell
      Bellows wedge
      Flow measuring Spirometers
      Fleisch-pneumotach
      Lilly (screen) pneumotach
      Turbine
      Pitot tube
      Hot-wire anemometer
      Ultrasound

    top

    See also
     
    Search more:
     

       
    Source Privacy License Download Contact Us Atlas
    Scientus.org Dictionary (Yet Another Wiki) RC : 1.39
    This article is licensed under the GNU Free Documentation License [copyleft]. It uses material from the Wikipedia article "Spirometry". link