|
A Faraday cage or Faraday shield is an enclosure formed by conducting material, or by a mesh of such material. Such an enclosure blocks out external static electrical fields. Faraday cages are named after physicist Michael Faraday, who built one in 1836 and explained its operation. The electrical charges in the enclosing conductor repel each other and will therefore always reside on the outside surface of the cage. Any external electrical field will cause the charges to rearrange so as to completely cancel the field's effects in the cage's interior. This effect is used for example to protect electronic equipment from lightning strikes and other electrostatic discharges. To a large degree, Faraday cages also shield the interior from external electromagnetic radiation if the conductor is thick enough and its meshes, if present, are significantly smaller than the radiation's wavelength. This application of Faraday cages is explained under electromagnetic shielding.
History Faraday stated that the charge on a charged conductor resided only on its exterior, and had no influence on anything enclosed within it. To demonstrate this fact he built a room coated with metal foil, and allowed high-voltage discharges from an electrostatic generator to strike the outside of the room. He used an electroscope to show that there was no electric charge present on the inside of the room's walls. The same effect was predicted earlier by Francesco Beccaria (1716–1781) at the University of Turin, a student of Benjamin Franklin's work, who stated that "all electricity goes up to the free surface of the bodies without diffusing in their interior substance". Later, the Belgian physicist Louis Melsens (1814–1886) applied the principle to lightning conductors. How a Faraday cage works A Faraday cage is best understood as an approximation to an ideal hollow conductor. Externally applied electric fields produce forces on the charge carriers (usually electrons) within the conductor, generating a current that rearranges the charges. Once the charges have rearranged so as to cancel the applied field inside, the current stops. The cage will block external electrical fields even if the cage contains some charges and an electric field in its interior. This is a consequence of the fact that the Maxwell equations are linear. Real-world Faraday cages See also | ||||||||
|
| |||||||||
 |
|
| |