| [Edit]
Ethernet is a large and diverse family of frame-based computer networking technologies for local area networks (LANs). The name comes from the physical concept of the ether. It defines a number of wiring and signaling standards for the physical layer, two means of network access at the Media Access Control (MAC)/Data Link Layer, and a common addressing format.
Ethernet has been standardized as IEEE 802.3. Its star-topology, twisted pair wiring form became the most widespread LAN technology in use from the 1990s to the present, largely replacing competing LAN standards such as coaxial cable Ethernet, token ring, FDDI, and ARCNET. In recent years, Wi-Fi, the wireless LAN standardized by IEEE 802.11, has been used in addition to or instead of Ethernet in many installations.
top
History
Ethernet was originally developed as one of the many pioneering projects at Xerox PARC.
The ethernet was invented in the period of 1973–75. Robert Metcalfe and David Boggs wrote and presented their "Draft Ethernet Overview" some time before March 1974. In March 1974, R. Z. Bachrach wrote a memo to Metcalf, Boggs, and their management, stating that "technically or conceptually there is nothing new in your proposal" and that "analysis would show that your system would be a failure." In 1975, Xerox filed a patent application listing Metcalf and Boggs, plus Chuck Thacker and Butler Lampson, as inventors (US4063220: Multipoint data communication system with collision detection).
In 1976, after the system was deployed at PARC, Metcalfe and Boggs published a paper titled Ethernet: Distributed Packet-Switching For Local Computer Networks.
The experimental Ethernet described in that paper ran at 3 Mbit/s, and had 8-bit destination and source address fields, so Ethernet addresses weren't the global addresses they are today. By software convention, the 16 bits after the destination and source address fields were a packet type field, but, as the paper says, "different protocols use disjoint sets of packet types", so those were packet types within a given protocol, rather than the packet type in current Ethernet, which specifies the protocol being used.
Metcalfe left Xerox in 1979 to promote the use of personal computers and local area networks (LANs), forming 3Com. He convinced DEC, Intel, and Xerox to work together to promote Ethernet as a standard, the so-called "DIX" standard, for "Digital/Intel/Xerox"; it standardized the 10 megabits/second Ethernet, with 48-bit destination and source addresses and a global 16-bit type field. The standard was first published on September 30 1980. It competed with two largely proprietary systems, token ring and ARCNET, but those soon found themselves buried under a tidal wave of Ethernet products. In the process, 3Com became a major company.
Metcalfe sometimes jokingly credits Jerome H. Saltzer for 3Com's success. Saltzer co-wrote an influential paper suggesting that token-ring architectures were theoretically superior to Ethernet-style technologies. This result, the story goes, left enough doubt in the minds of computer manufacturers that they decided not to make Ethernet a standard feature, which allowed 3Com to build a business around selling add-in Ethernet network cards. This also led to the saying "Ethernet works better in practice than in theory," which, though a joke, actually makes a valid technical point: the characteristics of typical traffic on actual networks differ from what had been expected before LANs became common in ways that favor the simple design of Ethernet. Add to this the real speed/cost advantage Ethernet products have continually enjoyed over other (token, FDDI, ATM, etc.) LAN implementations and we see why today's result is that "connect the PC to the network" means connect it via Ethernet. Even when the PC is connected by Wi-Fi, nearly all Wi-Fi gear uses Ethernet for connecting to the rest of the network.
Metcalfe and Saltzer worked on the same floor at Massachusetts Institute of Technology's Project MAC while Metcalfe was doing his Harvard University dissertation, in which he worked out the theoretical foundations of Ethernet.
top
General description
|
Ethernet was originally based on the idea of computers communicating over a shared coaxial cable acting as a broadcast transmission medium. The methods used show some similarities to radio system, although there are major differences, such as the fact that it is much easier to detect collisions in a cable broadcast system than a radio broadcast. The common cable providing the communication channel was likened to the ether and it was from this reference that the name "Ethernet" was derived.
From this early and comparatively simple concept Ethernet evolved into the complex networking technology that today powers the vast majority of local computer networks. The coaxial cable was later replaced with point-to-point links connected together by hubs and/or switches in order to reduce installation costs, increase reliability, and enable point-to-point management and troubleshooting. StarLAN was the first step in the evolution of Ethernet from a coaxial cable bus to a hub-managed, twisted pair network. The advent of twisted-pair wiring enabled Ethernet to become a commercial success.
Above the physical layer, Ethernet stations communicate with each other by sending each other data packets, small blocks of data that are individually sent and delivered. As with other IEEE 802 LANs, each Ethernet station is given a single 48-bit MAC address, which is used both to specify the destination and the source of each data packet. Network interface cards (NICs) or chips normally do not accept packets addressed to other Ethernet stations. Adapters generally come programmed with a globally unique address but this can be overridden either to avoid an address change when an adapter is replaced or to use locally administered addresses.
Despite the huge changes in Ethernet from a thick coaxial cable bus running at 10 Mbit/s to point-to-point links running at 1 Gbit/s and beyond, all generations of Ethernet (excluding very early experimental versions) share the same frame formats (and hence the same interface for higher layers) and can be readily (and in most cases cheaply) interconnected.
Due to the ubiquity of Ethernet, the ever-decreasing cost of the hardware needed to support it and the reduced panel space needed by twisted pair Ethernet, most manufacturers now build the functionality of an Ethernet card directly into PC motherboards, removing the need for installation of a separate network card.
|
top
CSMA/CD shared medium Ethernet
Ethernet originally used a shared coaxial cable (the shared medium) winding around a building or campus to every attached machine. A scheme known as carrier sense multiple access with collision detection (CSMA/CD) governed the way the computers share the channel. The scheme was relatively simple compared to competing technologies token ring or token bus. When one computer wanted to send some information, it followed the following algorithm:
Main procedure
Frame ready for transmission
Is medium idle? If not, wait until it becomes ready and wait the interframe gap period (9.6 µs in 10 Mbit/s Ethernet).
Does a collision occur? If so, go to collision detected procedure.
End successful transmission
Collision detected procedure
Continue transmission until minimum packet time is reached (jam signal) to ensure that all receivers detect the collision
Is maximum number of transmission attempts reached? If so, abort transmission.
Calculate and wait random backoff period
Re-enter main procedure at stage 1
This works something like a dinner party, where all the guests talk to each other through a common medium (the air). Before speaking, each guest politely waits for the current guest to finish. If two guests start speaking at the same time, both stop and wait for short, random periods of time (in Ethernet, this time is generally measured in microseconds). The hope is that by each choosing a random period of time, both guests will not choose the same time to try to speak again, thus avoiding another collision. Exponentially increasing back-off times (determined using the truncated binary exponential backoff algorithm) are used when there is more than one failed attempt to transmit.
Computers were connected to an Attachment Unit Interface (AUI) transceiver, which in turn connected to the cable. While a simple passive wire was highly reliable for small Ethernets, it was not reliable for large extended networks, where damage to the wire in a single place, or a single bad connector could make the whole Ethernet segment unusable. Multipoint systems are also prone to very strange failure modes when an electrical discontinuity reflects the signal in such a manner that some nodes would work just fine while others would work slowly due to excessive retries or not at all (see standing wave for an explanation of why); these could be much more painful to diagnose than a complete failure of the segment. Debugging such failures often involved several people crawling around wiggling connectors while others watched the displays of computers running ping and shouted out reports as performance changed.
Since all communications happen on the same wire, any information sent by one computer is received by all, even if that information was intended for just one destination. The network interface card filters out information not addressed to it, interrupting the CPU only when applicable packets are received unless the card is put into "promiscuous mode". This "one speaks, all listen" property is a security weakness of shared-medium Ethernet, since a node on an Ethernet network can eavesdrop on all traffic on the wire if it so chooses. Use of a single cable also means that the bandwidth is shared, so that network traffic can slow to a crawl when, for example, the network and nodes restart after a power failure.
top
Ethernet repeaters and hubs
|
For signal degradation and timing reasons, coaxial Ethernet segments had a restricted size which depended on the medium used. For example, 10BASE5 coax cables had a maximum length of 500 metres (1,640 feet). Also, as was the case with most other high-speed buses, Ethernet segments had to be terminated with a resistor at both ends. For coaxial cable based Ethernet, each end of the cable had a 50-ohm resistor and heat sink attached. Typically this was built into a male BNC or N connector and attached to the last device on the bus (or if vampire taps were in use to a socket mounted on the end of the cable just past the last device). If this was not done or if there was a break in the cable the AC signal on the bus was reflected, rather than dissipated, when it reached the end. This reflected signal was indistinguishable from a collision, and so no communication could take place.
A greater length could be obtained by an Ethernet repeater, which took the signal from one Ethernet cable and repeated it onto another cable. If a collision was detected, the repeater transmitted a jam signal onto all ports to ensure collision detection. Repeaters could be used to connect segments such that there were up to five Ethernet segments between any two hosts, three of which could have attached devices. Repeaters could detect an improperly terminated link from the continuous collisions and stop forwarding data from it. Hence they alleviated the problem of cable breakages: when an Ethernet coax segment broke, while all devices on that segment were unable to communicate, repeaters allowed the other segments to continue working, although depending on which segment was broken and the layout of the network the partitioning that resulted may have made other segments unable to reach important servers and thus effectively useless.
People recognized the advantages of cabling in a star topology, primarily that only faults at the star point will result in a badly partitioned network, and network vendors started creating repeaters having multiple ports, thus reducing the number of repeaters required at the star point; multiport Ethernet repeaters became known as "hubs". Network vendors such as DEC and SynOptics sold hubs that connected many 10BASE2 thin coaxial segments. There were also "multi-port transceivers" or "fan-outs". These could be connected to each other and/or a coax backbone. The best-known early example was DEC's DELNI. These devices allowed multiple hosts with AUI connections to share a single transceiver. They also allowed creation of a small standalone Ethernet segment without using a coaxial cable.
Ethernet on unshielded twisted-pair cables (UTP), beginning with StarLAN and continuing with 10BASE-T was designed for point-to-point links only and all termination was built into the device. This changed hubs from a specialist device used at the center of large networks to a device that every twisted pair-based network with more than two machines had to use. This structure made Ethernet networks more reliable by preventing faults with, but not deliberate misbehavior of, one peer or its associated cable from affecting other devices on the network, although a failure of a hub or an inter hub link could still affect lots of users. Also as twisted pair Ethernet is point-to-point and terminated inside the hardware the total empty panel space required around a port is much reduced, making it easier to design hubs with lots of ports and to integrate Ethernet onto computer motherboards.
Despite the physical star topology, hubbed Ethernet networks use half-duplex and CSMA/CD, with only minimal activity by the hub, primarily the Collision Enforcement signal, in dealing with packet collisions. Every packet is sent to every port on the hub, so bandwidth and security problems aren't addressed. The total throughput of the hub is limited to that of a single link and all links must operate at the same speed.
Collisions reduce throughput by their very nature. In the worst case, when there are lots of hosts with long cables that attempt to transmit many short frames, excessive collisions can reduce throughput dramatically. However, a Xerox report in 1980 summarized the results of having 20 fast nodes attempting to transmit packets of various sizes as quickly as possible on the same Ethernet segment . The results showed that, even for minimal Ethernet frames (64B), 90% throughput on the LAN was the norm. This is in comparison with token passing LANs (token ring, token bus), all of which suffer throughput degradation as each new node comes into the LAN, due to token waits.
This report was wildly controversial, as modeling showed that collision-based networks became unstable under loads as low as 40% of nominal capacity.
|
top
Bridging and switching
While repeaters could isolate some aspects of Ethernet segments, such as cable breakages, they still forwarded all traffic to all Ethernet devices. This created significant limits on how many machines could communicate on an Ethernet network. To alleviate this, bridging was created to communicate at the data link layer while isolating the physical layer. With bridging, only well-formed packets are forwarded from one Ethernet segment to another; collisions and packet errors are isolated. Bridges learn where devices are, by watching MAC addresses, and do not forward packets across segments when they know the destination address is not located in that direction.
Early bridges examined each packet one by one, and were significantly slower than hubs (repeaters) at forwarding traffic, especially when handling many ports at the same time. In 1989 the networking company Kalpana introduced their EtherSwitch, the first Ethernet switch. An Ethernet switch does bridging in hardware, allowing it to forward packets at full wire speed. Bridges and switches also allow mixing of speeds, an important feature when equipment of mixed age is in use. Even more importantly (especially with fast Ethernet) they overcome the cascading limits of hubs as a collision does not have to be detected by equipment on the other side of the switch or bridge.
Initially, Ethernet bridges and switches work somewhat like Ethernet hubs, with all traffic being echoed to all ports. However, as the switch "learns" the end-points associated with each port, it ceases to send non-broadcast traffic to ports other than the intended destination. In this way, Ethernet switching can allow the full wire speed of Ethernet to be used by any given pair of ports on a single switch.
Since packets are typically only delivered to the port they are intended for, traffic on a switched Ethernet is slightly less public than on shared-medium Ethernet. Despite this, switched Ethernet should still be regarded as an insecure network technology, because it is easy to subvert switched Ethernet systems by means such as ARP spoofing and MAC flooding. The bandwidth advantages, the slightly better isolation of devices from each other and the elimination of the chaining limits inherent in hubbed Ethernet have made switched Ethernet the dominant network technology.
When only a single device (anything but a hub) is connected to a switch port, full-duplex Ethernet becomes possible. In full duplex mode both devices can transmit to each other at the same time and there is no collision domain. This doubles the aggregate bandwidth of the link and was sometimes advertised as double the link speed (e.g. 200 Mbit/s) to account for this. However, this is misleading as performance will only double if traffic patterns are symmetrical (which in reality they rarely are). The elimination of the collision domain also means that all the link's bandwidth can be used (collisions can occupy a lot of bandwidth as links get busy) and that segment length is not limited by the need for correct collision detection (this is most significant with some of the fiber variants of Ethernet).
top
Dual speed hubs
In the early days of Fast Ethernet, fast Ethernet switches were relatively expensive devices. However, hubs suffered from the problem that if there were any 10BASE-T devices connected then the whole system would have to run at 10 Mbit. Therefore a compromise between a hub and a switch appeared known as a dual speed hub. These effectively split the network into two sections, each acting like a hubbed network at its respective speed then acted as a two port switch between those two sections. This meant they allowed mixing of the two speeds without the cost of a Fast Ethernet switch.
top
More advanced networks
Simple switched Ethernet networks still suffer from a number of issues:
They suffer from single points of failure; e.g., if one link or switch goes down in the wrong place the network ends up partitioned.
It is possible to trick switches or hosts into sending data to your machine even if it's not intended for it, as indicated above.
It is possible for any host to flood the network with broadcast traffic forming a denial of service attack against any hosts that run at the same or lower speed as the attacking device.
They suffer from bandwidth choke points where a lot of traffic is forced down a single link.
Some managed switches offer a variety of tools to combat these issues including:
Spanning-tree protocol to maintain the active links of the network as a tree while allowing physical loops for redundancy.
Various port protection features, as it is far more likely an attacker will be on an end system port than on a switch-switch link.
VLANs to keep different classes of users separate while using the same physical infrastructure.
Link aggregation to add bandwidth to overloaded links and to provide some measure of redundancy, although the links won't protect against switch failure because they connect the same pair of switches.
top
Autonegotiation and duplex mismatch
Many different modes of operations (10BASE-T half duplex, 10BASE-T full duplex, 100BASE-TX half duplex, ...) exist for Ethernet over twisted pair cable using 8P8C modular connectors (not to be confused with FCC's RJ45), and most devices are capable of different modes of operations. In 1995, a standard was released for allowing two network interfaces connected to each other to autonegotiate the best possible shared mode of operation. In addition it contained a mechanism for detecting the type but not the duplex setting of 10BASE-T, 100BASE-TX and 100BASE-T4 peers that did not use autonegotiation.
However, early interoperability problems led many network administrators to manually set the mode of operations of interfaces instead. This often led to duplex mismatches: in particular, when two interfaces are connected to each other with one set to autonegotiation and one set to full duplex mode, a duplex mismatch results because the autonegotiation process fails and the first interface results in half duplex mode. The effect of a duplex mismatch is a network that works but often at much slower than its nominal speed.
top
Ethernet frame types and the EtherType field
|
Frames are the format of data packets on the wire. Note that a frame viewed on the actual physical hardware would show start bits, sometimes called the preamble, and the trailing Frame Check Sequence. These are required by all physical hardware and is seen in all four following frame types. They do not show in any packet sniffing software because these bits are removed by the NIC before being passed on to the network stack software.
There are several types of Ethernet frames:
The Ethernet Version 2 or Ethernet II frame, the so-called DIX frame (named after DEC, Intel, and Xerox); this is the most common today, as it is often used directly by the Internet Protocol.
IEEE 802.2 LLC/SNAP frame
In addition, Ethernet frames may optionally contain a IEEE 802.1Q tag to identify what VLAN it belongs to and its IEEE 802.1p priority (quality of service). This doubles the potential number of frame types.
The different frame types have different formats and MTU values, but can coexist on the same physical medium.
The most common Ethernet Frame format, type II
It is claimed that some older (Xerox?) Ethernet specification had a 16-bit length field, although the maximum length of a packet was 1500 bytes. Versions 1.0 and 2.0 of the Digital/Intel/Xerox (DIX) Ethernet specification, however, have a 16-bit sub-protocol label field called the EtherType, with the convention that values between 0 and 1500 indicated the use of the original Ethernet format with a length field, while values of 1536 decimal (0600 hexadecimal) and greater indicated the use of the new frame format with an EtherType sub-protocol identifier.
IEEE 802.3 defined the 16-bit field after the MAC addresses as a length field again, with the MAC header followed by an IEEE 802.2 LLC header. The convention described earlier allows software to determine whether a frame is an Ethernet II frame or an IEEE 802.3 frame, allowing the coexistence of both standards on the same physical medium. All 802.3 frames have an IEEE 802.2 logical link control (LLC) header. By examining this header, it is possible to determine whether it is followed by a SNAP (subnetwork access protocol) header. Some protocols, particularly those designed for the OSI networking stack, operate directly on top of 802.2 LLC, which provides both datagram and connection-oriented network services. The LLC header includes two additional eight-bit address fields, called service access points or SAPs in OSI terminology; when both source and destination SAP are set to the value 0xAA, the SNAP service is requested. The SNAP header allows EtherType values to be used with all IEEE 802 protocols, as well as supporting private protocol ID spaces. In IEEE 802.3x-1997, the IEEE Ethernet standard was changed to explicitly allow the use of the 16-bit field after the MAC addresses to be used as a length field or a type field.
Novell's "raw" 802.3 frame format was based on early IEEE 802.3 work. Novell used this as a starting point to create the first implementation of its own IPX Network Protocol over Ethernet. They did not use any LLC header but started the IPX packet directly after the length field. In principle this is not interoperable with the other later variants of 802.x Ethernet, but since IPX has always FF at the first byte (while LLC has not), this mostly coexists on the wire with other Ethernet implementations, with the notable exception of some early forms of DECnet which got confused by this.
Novell NetWare used this frame type by default until the mid nineties, and since Netware was very widespread back then, while IP was not, at some point in time most of the world's Ethernet traffic ran over "raw" 802.3 carrying IPX. Since Netware 4.10 Netware now defaults to IEEE 802.2 with LLC (Netware Frame Type Ethernet_802.2) when using IPX. (See "Ethernet Framing" in References for details)
Mac OS uses 802.2/SNAP framing for the AppleTalk protocol suite on Ethernet ("EtherTalk") and Ethernet II framing for TCP/IP.
The 802.2 variants of Ethernet are not in widespread use on common networks currently, with the exception of large corporate Netware installations that have not yet migrated to Netware over IP. In the past, many corporate networks supported 802.2 Ethernet to support transparent translating bridges between Ethernet and IEEE 802.5 Token Ring or FDDI networks. The most common framing type used today is Ethernet Version 2, as it is used by most Internet Protocol-based networks, with its EtherType set to 0x0800 for IPv4 and 0x86DD for IPv6
There exists an Internet standard for encapsulating IP version 4 traffic in IEEE 802.2 frames with LLC/SNAP headers. It is almost never implemented on Ethernet (although it is used on FDDI and on Token ring, IEEE 802.11, and other IEEE 802 networks). IP traffic can not be encapsulated in IEEE 802.2 LLC frames without SNAP because, although there is an LLC protocol type for IP, there is no LLC protocol type for ARP. IP Version 6 can also be transmitted over Ethernet using IEEE 802.2 with LLC/SNAP, but, again, that's almost never used (although LLC/SNAP encapsulation of IPv6 is used on IEEE 802 networks).
The IEEE 802.1Q tag, if present, is placed between the Source Address and the EtherType or Length fields. The first two bytes of the tag are the Tag Protocol Identifier (TPID) value of 0x8100. This is located in the same place as the EtherType/Length field in untagged frames, so an EtherType value of 0x8100 means the frame is tagged, and the true EtherType/Length is located after the tag. The TPID is followed by two bytes containing the Tag Control Information (TCI) (the IEEE 802.1p priority (quality of service) and VLAN id). The tag is followed by the rest of the frame, using one of the types described above.
|
top
Physical layer
The first Ethernet networks, 10BASE5, used thick yellow cable with vampire taps as a shared medium (using CSMA/CD). Later, 10BASE2 Ethernet used thinner coaxial cable (with BNC connectors) as the shared CSMA/CD medium. The later StarLAN 1BASE5 and 10BASE-T used twisted pair connected to Ethernet hubs with 8P8C modular connectors (not to be confused with FCC's RJ45).
Currently Ethernet has many varieties that vary both in speed and physical medium used. Perhaps the most common forms used are 10BASE-T, 100BASE-TX, and 1000BASE-T. All three utilize twisted pair cables and 8P8C modular connectors (often incorrectly called RJ45). They run at 10 Mbit/s, 100 Mbit/s, and 1 Gbit/s, respectively. However each version has become steadily more selective about the cable it runs on and some installers have avoided 1000BASE-T for everything except short connections to servers.
Fiber optic variants of Ethernet are commonly seen connecting buildings or network cabinets in different parts of a building but are rarely seen connected to end systems for cost reasons. Their advantages lie in performance, electrical isolation and distance, up to tens of kilometers with some versions. Fiber versions of a new speed almost invariably come out before copper. 10 gigabit Ethernet is becoming more popular in both enterprise and carrier networks, with discussions starting on 40G and 100G Ethernet.
Through Ethernet's history there have also been RF versions of Ethernet, both wireline and wireless. The currently recommended RF wireless networking standards, 802.11 and 802.16, are not based upon Ethernet.
top
Related standards
Networking standards that are not part of the IEEE 802.3 Ethernet standard, but support the Ethernet frame format, and are capable of interoperating with it.
100BaseVG — An early contender for 100 Mbit/s Ethernet. It runs over Category 3 cabling. Uses four pairs. Commercial failure.
TIA 100BASE-SX — Promoted by the Telecommunications Industry Association. 100BASE-SX is an alternative implementation of 100 Mbit/s Ethernet over fiber; it is incompatible with the official 100BASE-FX standard. Its main feature is interoperability with 10BASE-FL, supporting autonegotiation between 10 Mbit/s and 100 Mbit/s operation -- a feature lacking in the official standards due to the use of differing LED wavelengths. It is targeted at the installed base of 10 Mbit/s fiber network installations.
TIA 1000BASE-TX — Promoted by the Telecommunications Industry Association, it was a commercial failure, and no products exist. 1000BASE-TX uses a simpler protocol than the official 1000BASE-T standard so the electronics can be cheaper, but requires Category 6 cabling.
Networking standards that do not use the Ethernet frame format but can still be connected to Ethernet using MAC-based bridging.
802.11 — A standard for wireless networking often paired with an Ethernet backbone.
top
See also
top
Implementations
|
|
